3 Ways 3D Metal Printing Is Revolutionizing Manufacturing

3 Ways 3D Metal Printing Is Revolutionizing Manufacturing

When they need to create quality engine components with a quick turnaround and tight tolerances, more and more manufacturers are turning to a new player in the field of manufacturing: 3D metal printing.

3D printed blisk
3D-printed blisk. The piece is made using a metal powder that is layered on top of itself. The excess powder is then used to create additional layers, which helps to reduce material waste in manufacturing.

3D metal printing is being used to create aircraft engine parts, fiber fan blades, fuel nozzles, and in 2015 NASA printed the first full-scale copper engine component for future use in space.

Whether 3D metal printing will become the way most manufacturing is done is only a matter of time. The question is: will you and your team be prepared to integrate this 3D metal printing in an efficient, comprehensive, ROI-savvy manner?

Read on to learn about the benefits and drawbacks of various types of 3D metal printing, the most likely integrations, and the important role post-processing with abrasive products plays in quality control.

Better, Faster, Stronger

History of 3D metal printing

3D printing (also called additive manufacturing) owes its blueprint to Dr. Hideo Kodama, who in 1981 published his findings on the potential to create an object by building it up in layers, and its 1984 birth to Charles Hull, aiming lasers at liquid in a process called photopolymerization. (Say that ten times fast.)

The real utility of 3D printing for the manufacturing industry didn’t become apparent until the early to mid-1990s with the emergence of Selective Laser Sintering (SLS), or the heating of powder thru lasers to fuse the particles together without ever melting them. This coincided with the proliferation of CAD tools allowing high production speed with computer-assisted precision, and the rest is manufacturing history.

Breaking the mold: 3D metal printing advances

Traditional casting requires a mold to be created in order to build even just one prototype. 3D printing is eliminating the need for molds by giving manufactures the ability to print one or multiple parts digitally.

  • Early printing: The process was slow, tedious and not suited for high-production needs with tight tolerances like jet engine components. Early printer models lacked a cooling component for the heated metal, and parts needed a high level of post-processing.
  • Future possibilities: In this Technotopia podcast, Greg Mark founder of Markforged, talks about his discoveries of microwaving metal 3D printed parts, creating stronger components. Mark also discusses the possibility of 3D printing surpassing cast part manufacturing, noting similarities to the 2D printing offset/digital changeover. He also predicts the end of the need to package and ship metal parts. Instead of a company purchasing a part or having it manufactured, the company could purchase the drawing and the part will simply be created by a printer at the company’s location.

Currently the two main types of laser-based 3D metal printing for the modern manufacturing era are Selective Laser Melting (SLM) and Direct Metal Laser Sintering (DMLS).

  • Direct Metal Laser Sintering (DMLS) – According to aerospace component testing company Element, DMLS works this way:

Direct metal laser sintering involves spreading a very thin layer of metal powder across the surface that is to be printed. A laser is slowly and steadily moved across the surface to sinter this powder, which means that the particles inside the metal are fused together, even though the metal is not heated enough to allow it to melt completely. Additional layers of powder are then applied and sintered, thus “printing” the object one cross-section at a time. In this way, DMLS gradually builds up a 3D object through a series of very thin layers.  

DMLS vs SLM 3D Printing for Metal Manufacturing

PROS: Extremely less likely to have internal defects then traditionally-manufactured counterparts (great for automotive or aerospace components)

  • Selective Laser Melting (SLM) – the same article outlines the process of SLM:

A high-powered laser fully melts each layer of metal powder rather than just sintering it.  – DMLS vs SLM 3D Printing for Metal Manufacturing

PROS: Very dense, very strong final product

Current models are a far cry from the early prototypes of 3D metal printing and are set to grow exponentially with future innovations and applications.

Designing the Future

[Widespread use of 3D metal printing] would give designers more freedom, allowing them to create and test parts and devices with complex shapes that can’t be made easily with any other production method—say, an intricate aluminum lattice or a metal object with internal cavities. It could eventually enable engineers and materials scientists to create parts with new functions and properties by depositing various combinations of materials—for example, printing out a magnetic metal next to a nonmagnetic one.  

The 3-D Printer That Could Finally Change Manufacturing, MIT’s Technology Review

Implementing 3D metal printing for manufacturing engine components and other intricate and necessarily tight-tolerance components has multiple potential benefits to the industry:

  1. High-performance parts created in less time with less human effort
  2. Printing larger parts with a variety of metals – including titanium
    Lincoln Electric’s Wolf Robotics team showed off R-BAAM (Robotic Big Area Additive Manufacturing) at FabTech 2016. This inventive machine features both a laser powder and a laser hotwire process, producing larger components than bed-build options. This kind of large-scale manufacturing is still working out kinks, one of which is the need for post-processing to finish the product.
  3. Complex shapes and intricate interiors are easier to create with printing compared to machining or casting
  4. Less material waste

    1. Parts created by additive manufacturing are produced layer by layer instead of standard subtractive manufacturing methods, such as CNC machining. In addition to using less material, 95-98% of leftover metal powder can be reused.

Post processing

3D printing is getting more accurate, faster, and less expensive, but as of right now printed parts typically require post processing. Depending on the application, this might mean CNC machining or finishing with abrasives.

Surface finish is often the issue. Rex-Cut has products that can help you reach your desired finish. For smooth edges, a mounted point or a type 1 wheel might be the answer. For surfaces, a quick change disc could give you the RA you need.

In keeping with moving manufacturing forward, post-processing can be automated with robotic solutions. Rex-Cut AbrasivesSmooth Touch Wheel which is often used on robots to finish products like engine components that require edges to be deburred without changing the part geometry.

If you are having trouble with post processing, send our experts your application details and we will suggest finishing solutions.

Stay tuned for the critical factors in successfully implementing 3D metal printing in your manufacturing process.

Leave a reply